5- Honey Bee Alarm/Shut-down Controller

5- Honey Bee Alarm/Shut-down ControllerThis alarm controller will be connected to the Honey Bee Bucket Alarm to turn off a pump or extractor when tripped by the alarm. This would mainly be used when transferring honey from a clarifier or when extracting with a large extractor. It will automatically turn that item off when the fill level is reached. The alarm will sound first (Approximately 4 1 2" from top) If not addressed the pump or extractor will shut down automatically when the second

This alarm controller will be connected to the Honey Bee Bucket Alarm to turn off a pump or extractor when tripped by the alarm. This would mainly be used when transferring honey from a clarifier or when extracting with a large extractor. It will automatically turn that item off when the fill level is reached. The alarm will sound first (Approximately 4 1/2" from top) If not addressed the pump or extractor will shut down automatically when the second float is reached (Approximately 2 1/2" from top). 

Mounting flanges are provided to mount the controller on the wall near your 110-volt outlet. Just plug this controller in a 110-volt outlet. Put the alarm on the container you wish to be monitored. Then plug your 110-volt machine or pump you are controlling into the controller. A small signal wire is then connected between the controller and the alarm. A 10ft. signal wire is included. If a longer signal wire is needed it may be purchased separately. All the additional signal wires are also 10 ft. unless a longer one is requested. The additional cord has an adapter to connect and lengthen the cord provided.  You're all set to stop overflowing your storage containers.